Setting ADSL modem D-Link DSL-520T

To be able to connect to the internet you should have a speedy line home phone, ADSL modem, Lan Card for your computer, lan cable (usually existing default ADSL modem) and the Telkom office to register.

In general there are 2 phases in the speedy seting internet ADSL modem and setting internet connection settings.

ADSL Modem Setting

First we need to connect the first computer with our ADSL modem using a cable LAN / Network. For the cable modem's default LAN ADSL usually Straight cable type (Go straight) while if we connect the ADSL modem directly to computer (do not use HUB) we must use a cable that diversiform Cross (Cross), you can store computer to be made to the Cross cable. Usually ADSL modem settings using a web-based means we have to ADSL modem settings with the browser program such as Internet Explorer, therefore we must know first IP Address / Address of the modem. By default / standard ADSL modem IP Address is 192.168.1.1 or try to read the manual to find the ADSL modem IP Address first. Then open the browser program (internet explorer) and type the IP address in the Address of the ADSL modem.



If the IP Address is properly connected and the Login box will appear to be able to go to Settings ADSL modem, usually username = admin password = admin (all lowercase) is the default login from the default ADSL modem or read the manual.


After we successfully entered the display will show the beginning of your modem, here I use the modem D-Link DSL-520T can be view here is different-depending on which modem you use, but basically the setting is the same.


To simplify we can use the wizard, which basically is a must diseting Connection Type, VPI and VCI
Where: Type = Bridge / Bridge Mode (for the time / volume base) & PPPoE (To Unlimited)
VPI = 8 (Central Java)
VCI = 81 (Central Java)
Here is a picture sequence of steps in the wizard modem D-Link DSL-520T.





Click Restart or Save depending on your modem.
Until this far modem is ready to be used for internet connection.
At the beginning of the earlier mentioned that the IP Address your modem is usually 192.168.1.1 is the default IP Address of the factory default. To change the IP Address you live search and change the LAN IP address with the new in the store or on Apply.



In addition to the LAN is also the DHCP, DHCP server is a program that will provide IP Address automatically to the lan card in our computer, if he is connected with the modem and the IP Address settings in the Automatic setting.


In the picture above there is a choice or not to activate the DHCP server on the modem, the Starting IP Address is the IP from the IP Addressnya and the Ending IP Address is up to how the IP Address, so on the image above DHCP enabled and he will give the IP Address ranging from 192.168.222.2 to 192,168,222,254

Finish